Being in business in Texas for more than 70 years, our team at Gillman has a lot of experience in the car industry.
At Gillman Honda in San Benito, TX, we want you to be prepared for any situation that may arise while you're driving. Flat tires are one such inconvenience all drivers will most likely experience at one point in their lifetime.
From your team at Gillman Honda, here are the 10 steps to change a flat tire:
1. Turn on your hazards and pull over cautiously. Drive onto the shoulder and as far off the road as possible. Avoid parking along curves or hills where you may be hidden from other drivers. Use the parking brake and find something to wedge behind your working tires if you are on an incline.
2. Gather your tools. Always keep a jack, wrench and spare tire in your car. WD-40 is also handy for loosening lug nuts that are especially tight.
3. Loosen the lug nuts. Turn counterclockwise to loosen, but don't remove them completely yet. If it helps - righty tighty, lefty loosey.
4. Use your jack. Follow your car's manual to know the appropriate location to place the jack. Raise your car so there's about six inches of ground clearance beneath your tire.
5. Remove the lug nuts. Pull the tire straight towards you and off of the car.
6. Put on the spare. Line up the holes and push the tire all the way in. Make sure it goes on straight.
7. Put the lug nuts back on. Don't tighten them completely yet, but enough to hold the tire in place.
8. Lower the car. Bring your car back down to the ground cautiously then put the jack away.
9. Tighten the lug nuts. Begin to tighten one lug nut, but not all the way. Then move to one opposite and tighten it. Work your way around the wheel gradually tightening the lug nuts. Then go back around the wheel and tighten them as tight as you can.
10. Gather everything and clean up. Load up your flat tire and make sure you have all of your tools from the side of the road in case you need to use them again.
Follow these easy steps to fix your flat and be back on the road in no time! If you ever need service or auto repair, we have some of the area’s most skilled mechanics to help.
Gillman Honda is big enough to service you and small enough to know you. Our helpful staff is always available to answer your questions about purchasing a new or used car, financing, auto repair or auto parts. Call us today at 866-607-9034 or stop by our dealership at 1801 Industrial Way in San Benito.
Always remember to be proactive to prevent breakdowns, accidents and flat tires. Check your tire pressure and wear regularly. Schedule a service inspection with Gillman Honda in San Benito today to see if you could benefit from new tires!
Schedule a Maintenance Appointment
Gillman Honda San Benito proudly serves the Brownsville, McAllen and Harlingen areas.